| 
| Jalon Hawk is no exception here. The silver brazing technique that
is used here at Desperado Cycles is one of delicacy. Using Oxygen
and Propane for the gas mixture allows a very small flame to be used-smaller
than a ‘bic’ lighter's flame. It burns very clean, allowing
no impurities to contaminate the flux or filler during use. |
| Using 5lbs of pressure per tank when silver brazing, while the orifice
of the torch tip is 03. This allows a flame that is small is size
and easy to control in the affective area of the solder joint. The
result is the ability to get the 45% cadmium free silver to flow before
the tubing begins color. |
|
